It appears that your cart is currently empty
When different adapter is used, since the voltages are different, it will burn your unit. It is very crucial that you use our adapters for our products only. Please contact us immediately
Free Shipping for $70+ (U.S.) ㅤ 📞 1-310-328-1600
- Features
- Specification
- Clinical Procedure
- FAQ
- Downloads
The Lightest and Most Efficient 2-in-1 Cordless Obturation System
Endo-Apex is one of the most advanced and efficient cordless obturation system ever introduced.
Endo-Apex successfully delivers predictable results in vertical condensation and 3 dimensional thermo-plasticized obturation.
The 2 most effective individual obturation device (Friendo, Gutta Easy) are beautifully combined as one convenient
package for maximum efficiency.
Thermoplastic obturation gun for back-fill treatment of
root canal filling material used after cleaning
and shaping of the canal
3 Temperature Settings & Fast Heating Speed
160°C / 180C° / 200°C
Takes only 23 sec. to reach 200°C
360° Swivel
Provides better access to root canals
WIPO PATENT: PCT / KR2009 / 003683
Easy Back-fill
Reduces hand and wrist fatigue and
adds more precision to reaching canals
3 Temperature Settings & Fast
Heating Speed
170°C / 200°C / 230°C
takes only 0.28 sec. to reach 230°C
Heats only at tip end
Heats only at the end of the tip preventing any burns near patient's mouth
Pen Tip Size (End Diameter / Taper)
Lightweight
Its weight is evenly distributed and
weighs almost 50% less than other brands
Warm vertical condensation pen for softening, spreading
and compacting root canal filling material
- Specification
- Components
- Service
Friendo (Pen)
Gutta Easy (Gun)
Operating Time
3 sec. shot x 100
1 hr. and 45 min.
Operating Temperature
170°C/200°C/230°C
160°C/180°C/200°C
Charging Time
2 hrs. and 30 min.
2 hrs. and 30 min.
Weight
68g (2.3oz)
200g (7oz)
Charger Weight
453g (15.9oz)
AC Adapter Weight
200g (7oz)
Charger Input Power
AC 100~250V, 50~60 Hz
Charger Output Power
6V DC, 2.5A
Free Shipping over $70
We fulfill all your orders as quickly as possible.
2-Year Warranty Policy
Product Warranty: 2 years Battery warranty: 1 year
2-week Demo
Clinical Procedure
Clinical Field
Test Review
A training video which explains how to use the Endo-Apex dual obturation system from DXM step by step.
This video covers the entire vertical condensation and back fill obturation procedures.
FAQS
Charger has a burning smell
Battery pins / Charger pins are corroded and will not charge
Pins corrode due to too much sterilization. Any liquid left from sterilization will cause corrosion. Make sure to have the unit dry after sterilization.
Friendo Pen is not turning on
This is the most common complaint that we receive from the customers.
Almost 98% cases are due to lack of charging.
Please keep the unit charged at ALL TIMES for longer battery lifespan.
Why does my Friendo Heating Condensation Pen stop heating after a few seconds?
The heating stops after 3 seconds and activates again after a short pause because we have upgraded our software to prevent any burns with longer heating cycle during the treatment for patient safety.
My Gutta Easy obturation gun shows “Er1”. What does this mean?
“Er1” shows on LED display when the heater is in a bad contact with the PCB inside.
Try turning the heater around and if it still doesn’t work, please request for an inspection.
My Gutta Easy obturation gun does not turn on. What should I do?
If the gun was not charged, charge it, and try turning it on again.
Also, try the reset button on the bottom of the handpiece. Press the square button. Once pressed, it will click in. Leave it for few seconds and press it again. Unit will turn on. If it still doesn’t turn on, please request for an inspection.
Gutta percha pellet is stuck in my Gutta Easy obturation gun and does not work
Please request for an inspection. Our repair department would have to disassemble the unit and remove the pellet inside.
To prevent this from happening, please use 1 pellet at a time. Do not use 2. Once the pellet is inserted, insert the plunger pushing towards the mouth of the handpiece.
Also, make sure the plunger has the white o-ring (Teflon ring) in place.