It appears that your cart is currently empty
Free Shipping for $100+ (U.S.) ㅤ 📞 1-310-328-1600
Free Shipping for $100+ (U.S.) ㅤ 📞 1-310-328-1600
Single-Sided - IPR Metal Auto Interproximal Reduction Strip
Metal Auto Interproximal Reduction Strip: Single-Sided
- All Metal Auto Strips can also be used manually
- IPR Strips are compatible with Contra Angle Handpiece (ex., W&H, Kavo Kerr's Contra Angle handpiece)
- The blade and the holder are less likely to break due to strongly connected parts
- Strip is less likely to bend or break due to strengthened durability of the holder
- IPR system has to be used only by Low-Speed Handpieces.
- For the type, we recommend back and forth movement Contra Angle type, and maximum RPM should not exceed 30,000RPM. If exceeded, it should cause, it will cause severe stress in the patient's mouth.
- Suitable for safe minimal invasive orthodontic preparations
- Excellent for contouring, high polishing and finishing of interproximal areas and subgingival surfaces
- Excellent tools with perfect calibrated thickness strips, for a controlled interproximal reduction.
- Made in South Korea
| [ Strip with Hole ] | [ Strip without Hole ] |
| Better for curved surface of tooth than the Stip without Hole | The blade is much stronger |
| Dust of tooth and water pass through holes of the blade | It is less likely to bend or break when it is used |
| Temperature falls down during the strip process when it is used with handpiece | It is less likely to make a scratch on tooth than the Strip with Hole |
| AUTO STRIPPING BUR-SINGLE SIDED |
| A non-diamond coated area provides the opportunity to insert the contact point without damaging the enamd. |
| SNGLE SIDED - RIGHT(R) & LEFT (L ) |
| COLOR | PRODUCT CODE | DENSITY OF DIAMOND COATING ON THE BLADE | THICKMESS OF BLADE(Uint : mm) |
| Yellow |
004-015R(WITHOUT HOLE) 004-015L(WITHOUT HOLE) |
15(FINE) |
0.06 |
| White |
004-025R(WITHOUT HOLE) 004-025L(WITHOUT HOLE) |
25 | 0.08 |
| Red |
004-040H(WITH HOLE) 004-04L(WITHOUT HOLE) |
40 | 0.10 |
| Gray |
004-060R(WITHOUT HOLE) 004-060L(WITHOUT HOLE) |
60 | 0.14 |
| Green |
004-090R(WITHOUT HOLE) 004-090(WITHOUT HOLE) |
90(COARSE) | 0.17 |
|
1 μm = 1/1000mm Thickness of Blade is not same size as a gap between the theeth to strip |